Stock Number K13049

  36"/45" x 132" POREBA GAP-TYPE ENGINE LATHE W/DRO
New 1996, S/N 7402-06-04016-05, Model TRP-93X3M
 
EQUIPPED WITH:
Anilam Wizard 2-Axis Digital Readouts
Inch-Metric Threading Capabilities
Removeable Gap
Power Rapid Traverse To Carriage & Compund
32" 4-Jaw Chuck - 15" 3-Jaw Chuck
16" Steady Rest - 4-Way Tool Post
Hardened & Ground Bed Ways
Coolant System - Automatic Lubrication
Large Box Of Tooling: Including Tool Holders,
  Boring Bars, Faceplates, Spindle Centers,
  And Reducers.
 
CATALOGUE SPECIFICATIONS:
Hole Thru Spindle...................... 3.75"
Swing Over Bed Ways, Rated............. 36.6"
Swing thru Gap......................... 45.2"
Length Of Gap From Spindle Nose........ 21.2"
Distance Between Centers............... 132"
Weight Capacity Between Centers........ 13200 LBS
Weight Capacity w/(1) Steady........... 16700 LBS
Swing Over Cross-Slide................. 24.8"
Spindle Nose........................... A1-11
(21) Spindle Speeds, Range............. 9 to 900 RPM
(70) Longitudinal Feeds, Range......... .0043 to .500 IPR
(70) Cross Feeds, Range .0021 to .250 IPR
(70) Top Slide Feeds, Range............ .001 to .125 IPR
(56) Thread Range...................... 1/4 to 30 TPI
(62) Metric Thread, Range.............. 1 to 120 MM/M
(63) Diametral Pitch, Range............ .5 to 60
(44) Module Threads, Range............. .25 to 30 MM/R
Power Rapid Traverse, Carriage......... 190 IPM
Power Rapid Traverse, Cross Slide...... 95 IPM
Power Rapid Traverse, Top Slide........ 48 IPM
Cross-Slide Travel..................... 17.3"
Top-Slide Travel....................... 11.8"
Quill Taper............................ 6 MT
Tailstock Quill Diameter............... 5.125"
Quill Travel........................... 11.5"
Motor, Horsepower...................... 23/36 HP
Weight Approximately................... 20000 LBS