OKUMA Multus B300W CNC Turning Center with Universal Head and Sub-Spindle
                                                                         New 2008

Equipped With:
OKUMA OSP P200 CNC Contol with THiNC ADMAC Parts software
Big Bore Option A2-8 nose  (38-3800 RPM, 30/20HP) , 8" Kitagawa Chuck Package, 40 Station Automatic Tool Changer, CAPTO C6 Spindle Taper, Parts Catcher, Parts Catcher for the sub-spindle,
Mist Collection System,  Side Exit Chip Conveyor, Chip Blaster  JV10  1000 psi Pump System - multi-port
version w/ programmable pressures,  Thru H1 Spindle Coolant Preparation for 1,000 psi,  Multi-tap transformer for 480 volt incoming line power

Specifications:
Distance between Spindle Noses:                                 50.8"
Distance between Std. Chucks with Std. Jaws:          39.6"
Swing over Bed:                                                      24.8"
Max Recommended Turning Diameter:                       23.8"
Max Recommended Turning Length:                            39.6"
X-Axis Travel:                                                  22.83" (+22.04" to -0.79")
Y-Axis Travel:                                                   6.30" (+3.15" to -3.15")
Z-Axis Travel:                                                              36.81"
W-Axis Travel (sub-spindle):                                    39.37"
C-Axis Travel:                                      Control angle 0.001 degrees, both spindles
B-Axis Travel:                                Control angle 0.001 degrees, 225 total, +30 to -195 degrees
Rapid Travel IPM:          X (1,574); Y (1,024); Z (1,574); W (787); C (200 RPM); B (200 RPM)
Coolant Tank:                                    105 gallons
Floor Space                             (W x D x H):  171" x 89" x 102" (not including chip conveyor)
Weight:                                          22,660 lbs. (w/ 40 ATC)
 

Condition : The machine has only cut plastic and has approximately 6,400 hours of cut time on it
                     Appears to be in Excellent Condition !