12" x 40" SHIGIYA GPA30 CYLINDRICAL GRINDER
                                            New 1987, Model GPA30-100,SN: 330071
                                                                 Stock # Q10194
Equipped With:
For Precision External ( OD) and Internal ( ID ) Grinding, Equipped with I.D. Spindle , Coolant System, ( 2) Steady Rests, Manual or Automatic Pick feed, Manual or Automatic Table Control, Spark Out Timer/Counter, Swiveling Workhead, Feed Position on Workhead / Foot Stock, ID and OD Grinding Wheel Mounts Included

Note: This Machine is From Walt Disney World's Tool Room, Low Use.

SPECIFICATIONS:
Swing Over Table, Maximum.......................... 11.8"
Grinding Diameter, Maximum......................... 12"
Work Length Capacity, Nominal...................... 40"
Grinding Wheel Diameter (New)...................... 20"
Grinding Wheel Width.................................... 3"
Grinding Wheel Hole Dia................................ 10"
Grinding Wheel Speed................................... 1238 RPM
Headstock Speeds........................................ 20 to 362 RPM
Table Power Traverse Rate............................. 1.9" & 118" IPM
Workhead Swivel:
Counterclockwise/Clockwise........................... 7/1 Degrees
Infeed Rapid Approach, Side Movement........... 3"
Infeed Stock Removal Amounts, Range........... 0-1.2"
Center Hole Taper ........................................ MT#4
Maximum Load ............................................. 300 lbs
Wheel Drive................................................... 5 HP
Hydraulic Pump Drive...................................... 1 HP
Electrics........................................................ 230/460/3/60
Dimensions, Approx ....................................... 142"x83"x60"
Weight, Approx............................................... 9,000 lbs.

Condition: Appears to be in Very Good Condition. From Walt Disney World's Tool Room